Title: Billllllllllllllllllllllllllllllllllll
sickmax - April 8, 2007 02:48 PM (GMT)
who wants to help me
What you have to do:
1. measure your rear vehicle ride height
2. jack up the car and place jack stands
3. unbolt the bottom bolts holding your rear shocks to the beam
4. loosen the bolt going through the bushing on your beam (there is one on each side, two total)
5. jack up the beam until it is at the ride height you measured earlier
6. tighten the two bolts you loosened
7. tighten the rear suspension bolts back on
8. lower and drive around
Black Maxima - April 8, 2007 03:32 PM (GMT)
I was going to do that on my car, but realized it's only for 5th Gens.
Suicidalspd99 - April 8, 2007 05:19 PM (GMT)
What is this. Does this have anything to do with your axle being out of center. Give me a shout.
Black Maxima - April 8, 2007 10:45 PM (GMT)
| QUOTE |
| Does this have anything to do with your axle being out of center. |
Yes.
sickmax - April 9, 2007 01:41 AM (GMT)
yes that is exactly what it fixes
Suicidalspd99 - April 9, 2007 04:00 PM (GMT)
Alright. When you wanna do it?
sickmax - April 9, 2007 08:16 PM (GMT)
Skierxx5556 - April 9, 2007 11:08 PM (GMT)
Is that only if your lowered or does it work for all 5th gens and whats the advantages?
sickmax - April 10, 2007 01:41 AM (GMT)
Suicidalspd99 - April 10, 2007 04:40 AM (GMT)
Being lowered really sets off the axle like that. I think thats really odd. But yeah gotta let me know when. This looks to be a bigger job though. But we will see.
correction. I did a lil looking. does not seem bad. But I prefer if we do this at my place. Uh maybe Saturday morning, depending on weather