View Full Version: Sold 03 Headlights With Dde's - Project

CTMaximas > 5th Generation Classifieds > Sold 03 Headlights With Dde's - Project



Title: Sold 03 Headlights With Dde's - Project
Description: SOLD


GET Ukrainian - August 12, 2009 10:32 PM (GMT)
Up for sale are drivers and passengers side headlights off of a 2003 maxima. These headlights have the stock Xenon bulbs along with the ballasts. The amber turn signal lense has been cleared out and replaced with the clear lense. They do NOT have the highbeam/turn signal/parking light bulbs.

These headlights had the Umnitza DDE set up, but unfortunatly the DDE's got the "pink eye" problem so I just disconnected the halos from the ballast since I had no time to replace them.

I also have the replacement DDE's that I didn't get around to installing.

Then a few weeks ago I got hit in a parking lot and got a slight scratch/scrape on the driver's headlight plastic lense. Hence I'm selling this set.

This set is good for a project set if you want to install DDE's and black out the housing.

So just for clarifaction here is what is in this set:
>Drivers Side headlight with the stock Xenon and ballast. has a slight scratch on the lense. Has 2 bad Umnitza DDE rings, and a good ballast for the DDE kit
>Passenger Side headlight with stock Xenon and ballast. Has 2 bad Umnitza DDE rings, and a good ballast for the DDE kit
>Replacement DDE rings (4 total)
>Wiring for DDE kit

I'm trying to sell these as a complete set, but willing to take offers for part outs. I'm asking $220 OBO for the whole set. Or $200 for both headlights and $50 for the replacement DDE's

Here are the pictures...

Passenger Side (the tape holds the DDE ballast to the stock ballast for a neater install):

user posted image

Passenger Side Back:

user posted image

Drivers Side Dent/Scratch (it is not punctured through at all, just surface scrape):

user posted image

Drivers Side Dent/Scratch again (The accident caused the lense to come off from the housing a little bit, hence all the gray sealant looking like crap but it is no problem since you'd have to bake the headlights anyways to take them apart to install DDE's)

user posted image

Drivers Side Rear:

user posted image

GET Ukrainian - August 12, 2009 10:33 PM (GMT)
The whole kit:

user posted image

DDEs:

user posted image

DDEs:

user posted image

and here is how everything looked before the pink eye problem and how it will look again when you replace the DDE's

user posted image

user posted image


So essentially what you would have to do is bake the headlights, replace the rings, put them back (There's how-to's http://shiftice.com/angel_eyes.html). And than use your turn signal bulbs and pick up a set up high beam bulbs. I would also say screw the parking light bulb because it doesnt flow with the angel eyes.

GET Ukrainian - August 14, 2009 02:33 AM (GMT)
sold




Hosted for free by InvisionFree