Title: Fs:'97-'99 Instrument Cluster, Polarg & Led Loaded
Zach95SE - May 16, 2006 06:02 PM (GMT)
FS: '97-'99 Instrument cluster, Polarg & LED loaded, 60k miles, CLEAN!!!
--------------------------------------------------------------------------------
I bought this from MetalMaxima a few months back but never had the ambition to make it fit in my 95. It is plug and play with 97-99 and will fit 95-96 but the harness must be spliced. Here is the exact wording from Dan's original thread. I will have more pics up a little later. It is raining and I just had surgery on my ankle so give me a little bit.
Alright, I am putting up the 4th gen cluster I was going to retrofit into my car up for sale. Nothing wrong with this cluster, I simply decided on going a different route.
Up for sale is the cluster, has about 60k miles on it, in perfect condition. The OEM cluster lights have been replaced with Polarg 194 wedge bulbs. There is a single 8000MCD blue LED loaded behind each needle and soldered to the OEM power source. The LEDs are contructed with a 560-ohm resistor and ran with 18AWG KnuKonceptz Kable, with the ends shrink-tube wrapped for maximum protection.
I am asking for $80 for this gem, all you need to do is simply take off your gauge faces and needles, put 'em in, and enjoy the glow!!!
*This is an older pic, wires have since been soldered.
--------------------------------------------------------------------------------
I bought this from MetalMaxima a few months back but never had the ambition to make it fit in my 95. It is plug and play with 97-99 and will fit 95-96 but the harness must be spliced. Here is the exact wording from Dan's original thread. I will have more pics up a little later. It is raining and I just had surgery on my ankle so give me a little bit.
Alright, I am putting up the 4th gen cluster I was going to retrofit into my car up for sale. Nothing wrong with this cluster, I simply decided on going a different route.
Up for sale is the cluster, has about 60k miles on it, in perfect condition. The OEM cluster lights have been replaced with Polarg 194 wedge bulbs. There is a single 8000MCD blue LED loaded behind each needle and soldered to the OEM power source. The LEDs are contructed with a 560-ohm resistor and ran with 18AWG KnuKonceptz Kable, with the ends shrink-tube wrapped for maximum protection.
I am asking for $80 for this gem, all you need to do is simply take off your gauge faces and needles, put 'em in, and enjoy the glow!!!
*This is an older pic, wires have since been soldered.
Zach95SE - May 16, 2006 06:02 PM (GMT)
It comes with the gauge face/cluster too and I will throw in the white gauge overlays for no cost that I bought for 25 bucks.
************** EDIT ******************
In order to make this work on an earlier 4th gen, you will need to splice the '97-'99 model year harness into your OEM harness.
Fortunatley, I have the '97-'99 harness ready to go. The harness has the ends with female bullet connectors soldered to the ends, all you would have to do is simply splice into your harness using male bullet crimp connectors. I have the bullet connectors and the pre-prepped '97-'99 harness ready to go for another $10.
************** EDIT ******************
In order to make this work on an earlier 4th gen, you will need to splice the '97-'99 model year harness into your OEM harness.
Fortunatley, I have the '97-'99 harness ready to go. The harness has the ends with female bullet connectors soldered to the ends, all you would have to do is simply splice into your harness using male bullet crimp connectors. I have the bullet connectors and the pre-prepped '97-'99 harness ready to go for another $10.
sunten1 - May 18, 2006 01:45 PM (GMT)
SPAK.......
Zach95SE - May 19, 2006 12:32 AM (GMT)
I copied and pasted wrong. It is direct fit for 98-99 because of the digital odometer.
spak920 - August 2, 2006 06:08 AM (GMT)
got a pic of the front face of it?
Zach95SE - August 2, 2006 11:54 AM (GMT)
You use your face. He never sent me the other part. I have that piece, the plastic piece and I think the black bezel but no gauge faces.
spak920 - August 12, 2006 10:28 PM (GMT)
so it wont fit a 97?
Zach95SE - August 12, 2006 11:30 PM (GMT)
No it will fit you just have to splice wires.